Product introduction
Lithium battery system for full electric passenger vehicle, suitable for small full electric vehicle, divided into two modules,
Product characteristics
Ø used for pure electric passenger cars
Ø using lithium iron phosphate batteries and battery packs total capacity of 23.4 Kwh, mass ratio of energy is as high as 117 wh/kg
Ø through strict quality control and scientific selection method, battery high consistency
Ø independent research and development of the battery module assembly, good flame retardant, easy to maintain
Ø independent form a complete set of BMS, and better alignment of the battery
Ø BMS function is perfect, strong stability, high reliability, strong anti-jamming capability
Ø Discharge rate is high, the speed is fast, battery can reach 200 km
Ø Quick charge can be performed
Product specification
| Item | Basic parameters |
| Battery pack model | ROT2912008 |
| Nominal voltage | 76.8 V |
| Nominal capacity | 198 ah |
| Voltage range | 60-87V |
| Nominal storage of energy | 15.2 KWh |
| Single cell type | RF46160M – 22 |
| Cell combination mode | 9 and 24 series |
| Rated charging current | 110 a |
| Rated discharge current | 200 a |
| Peak discharge current (30s) | 400 a |
| Communication interface | Vehicle CAN communication, charger CAN communication, RS-232 |
| Power supply | 12 v (9 ~ 18 v) |
| Battery Management System (BMS) | Includes main control unit and sampling unit |
| Cycle life | ≥2000 |
| High pressure control | built-in |