Rawsuns Mobile Energy Storage Charging Cabinet RS100 – Product Overview
Core Specifications: 50kW/100kWh
Rawsun Mobile Energy Storage Charging Cabinet is a highly integrated, flexibly deployable outdoor energy storage system designed for commercial and industrial applications and outdoor operations. It supports direct power supply from the low-voltage AC side and is compatible with DC national standard charging. The system utilizes lithium iron phosphate (LFP) batteries, offering high energy density, long cycle life, and intelligent temperature control.
RS100 Key Technical Parameters
| Category | Parameter Details |
| System Parameters | DC voltage range: 600V~876V; Output voltage: 380V@AC; System configuration: 1P240S; Rated power: 50kw; Matching PCS: 50kw (bidirectional converter); Nominal energy of battery system: 99.8kwh; Dischargeable energy: ≥99.8kWh; Battery cycle efficiency: ≥95%@AC Battery temperature control method:natural dissipation/Heating film heating |
| Physical Specifications | Dimensions (LWH): 1220*1045*1000mm; Weight: Approximately 940kg; Protection level: IP55 |
| Operating Environment | Operating temperature range: -20~50℃; Operating humidity range: ≤95% (no condensation); Maximum operating altitude: 2000m (derating required above 2000m) |
| Battery Cell Parameters | Rated capacity: 130Ah; Rated energy: 416Wh; Rated voltage:3.2V Operating voltage range: 2.5-3.65V; Quantity: 240 |
| Module Parameters | Configuration method: 1P30S; Rated voltage:96V Operating voltage range: 70-109.5V; Quantity: 8 modules; Nominal energy per module: 12.48kwh |
| System Composition | Battery system: 8 battery modules; BMS/BMU/BCMU management systems: 1 set; Fire protection system: 1 set (customizable); PCS bidirectional converter: 1 set; DCDC: 2 sets (40KW total); EMS energy management system: 1 set |
Core Advantages & Bidirectional Functionality
1. Bidirectional Power Conversion (PCS) – Core Feature
The integrated 50kW bidirectional inverter (PCS) is the heart of the system, enabling two key modes of operation:
Charging Mode (Grid/DC Charger → Battery): The PCS converts grid AC power (380V) or power from a DC charging pile into DC power to charge the internal battery system efficiently.
Discharging Mode (Battery → Load/Grid): The PCS inverts the DC power from the battery into stable AC power (380V) to supply various equipment, support the local grid, or feed power back in specific applications.
This bidirectional capability is fundamental for functions like peak shaving and valley filling.
2. Highly Integrated All-in-One Design
Small footprint, supports forklift and crane handling, suitable for various deployment scenarios.
Front-maintenance design allowing independent module servicing for easy operation and maintenance.
3. Flexible Modular Scalability
Supports 2h/4h/6h energy configurations; capable of parallel connection of multiple units horizontally or vertically.
Suitable for applications ranging from kWh to MWh levels.
4. Intelligent Management System
Built-in Energy Management System (EMS) supporting multiple operational modes and strategies enabled by the bidirectional PCS, including peak shaving/valley filling, reactive power compensation, demand response, and grid frequency regulation.
Real-time monitoring of battery status (voltage, temperature, insulation) with intelligent early warnings and fault diagnosis.
5. High Safety & Reliability
Comprehensive cell voltage monitoring + aerosol fire suppression system + 2-hour fire protection design.
IP55 protection rating, adaptable to a wide temperature range of -20°C to 50°C, with high seismic and wind resistance.
Cluster-level fault isolation,one-to-one precision temperature control,independent charge/discharge management, distributed unit management.